Now available on AOL IM at: ARPLdigitalworks. Drop in and ask your digital questions digitally.

Laser Cutter Process Request Form (fill out online and print) Important notes (read before using laser cutter) Acceptable Materials Power and Speed Settings Do it right. Read the TIPS! Removing the "Educational Version" stamps from laser cuts Setting up AutoCAD Laser Cutter Requester directions

Cost: Students: $0.30 per minute. Faculty, Staff and Research Centers: $0.45 per minute Charges are applied after the cutting job has been completed. Printing accounts must have a positive balance at start of the laser cutting job. A maximum number of minutes will be calculated before a job begins and ONLY that number of minutes will be processed until additional funds are added to the account.

 

Material Size ALERT!

Please make sure that your material is NO LARGER than 17-3/4" x 31-3/4"

WARNING: You can not use the EDUCATIONAL version of AutoCAD to generate drawings which are going to be used to generate lasercutter jobs. There is no way to remove the EDUCATIONAL VERSION from the laser cut job generated and you will be charged for the time it takes to etch this title block into the materials.

Note: The directions detailing the use of the laser cutter must be followed to the letter. Users of the laser cutter are still responsible for any mistakes that are generated during the cutting operation.